justin case

Can anyone reccomend a cupping kit thats going to be as long as the G8 power, top 3 ( 3 metres ) thats going to be nice and stiff

The one that comes with the G8 is awfull its far to bendy Im having issues with large balls of groundbait and found that I had to use a swinger instead

I had a look at the drennan and the Preston spot on but they are far too short

JC

steve (stonecold)

Garbolino extender dunno how long it goes to tho. O ther than than why not use a G8 top 3 as one

justin case

I did think about using a power top Steve but I have them all rigged up and dont want to break the elastic down. as well as this, I have the power tops rigged up at full length
to turn one into a cupping kit I would need to nip the top back a foot, and I would be back to square 1

The drennan 70g cupping kit when it comes to stiffness is spot on sadly its just not long enough,

Im a little fussy and have all my tops exactly the same length I doubt there is an inch difference I would like to get a cupping kit the same if I can

keith

Garbolino extendable is the mutts nutts. Will fit a variety of poles, just mark it in line with your top kits and same place every time.

__________________
GOT Baits you know it makes sense

www.gotbaits.co.uk

silver fish

If it's long enough the Tri-cast cupping kit is the strongest I've seen, it's expensive at a bit over £50 but you get what you pay for! I know a couple of guys who use them on Daiwa poles because they use a lot heavy leam / groundbait and they swear by them. You can reach them on the following -

TELEPHONE +44 (0) 1706 861807
FAX +44 (0) 1706 643336
E MAIL sales@tri-castfishing.co.uk

Good luck, cheers....Mark

justin case

Thanks guys thats a few good leads